自動攪拌一體車工作時電機發熱怎么辦？ - 行業資訊_自動混凝土攪拌機知識-山東山汽工程機械（集團）有限公司

站內搜索

自動混凝土攪拌機知識

公司新聞行業資訊

熱點推薦

ABS系統對自拌混凝土攪拌車起什么作用？

2020-11-28

自動上來哦混凝土攪拌車的組成

2021-11-30

混凝土攪拌車做到安全行車需要做自身的調整嗎？

2021-08-23

自拌混凝土攪拌車如何防止車體罐體容積變小？

2021-01-26

關于山汽

聯系人：劉老師

電話：400-879-1999

公司：山東山汽工程機械（集團）有限公司

地址：山東省萊州市206國道與308省道交叉口東南50米

自動攪拌一體車工作時電機發熱怎么辦？

所屬分類：行業資訊發布時間：2022-03-09 來源：http://www.shangdapress.com/ 瀏覽量：18

電機是自動攪拌一體車的動力來源，電機的好壞也決定了攪拌車是否可以長時間進行工作。或許你在使用自動攪拌一體車時遇到了，電機發熱的情況，是的，沒錯，自動攪拌一體車工作時間久了，電機也會散熱，會出現發熱的情況，除此之外，自動攪拌一體車使用后電機嚴重發熱出現原因主要有以下兩種原因造成：

The motor is the power source of the automatic mixer. The quality of the motor also determines whether the mixer can work for a long time. Maybe you encounter the motor heating when using the automatic mixing vehicle. Yes, yes, the motor will also dissipate heat and generate heat after working for a long time. In addition, there are two main reasons for the serious heating of the motor after the use of the automatic mixing vehicle:

一、電機繞組熱量散發多，沒能及時通過外殼散發掉。

1、 The heat of the motor winding is dissipated too much and cannot be dissipated through the shell in time.

二、電機外殼散發熱量的能力較差。

2、 The ability of the motor shell to dissipate heat is poor.

這兩種因素都可能造成自動攪拌一體車的電機熱量太大而導致電機被燒毀。這兩種因素造成電機過熱其根本原因在于：

Both of these factors may cause the motor of the automatic mixer truck to be burned due to too much heat. These two factors lead to motor overheating. The root causes are:

一、自動攪拌一體車電機繞組產熱太多，其根本問題是在于電機導線非純銅導線所導致的，純銅導線導電能力強，電阻小，因此產熱少，如果其他材質導線電機工作時電阻大產熱多；

1、 The fundamental problem is that the motor winding of the automatic mixing integrated vehicle produces too much heat, which is caused by the fact that the motor conductor is not a pure copper conductor. The pure copper conductor has strong conductivity and low resistance, so it produces less heat. If the conductor of other materials has high resistance and produces more heat when the motor works;

二、自動攪拌一體車作業后電機外殼散熱的能力差，根本問題在于外殼是非純鋁材質。合金鋁不但質量輕，而且散熱的能力更強，采用其他材質作為電機外殼，散熱的能力不如鋁材質。。

2、 After the operation of the automatic mixer, the heat dissipation capacity of the motor shell is poor. The fundamental problem is that the shell is made of non pure aluminum. Alloy aluminum not only has light weight, but also has stronger heat dissipation capacity. Using other materials as motor shell, the heat dissipation capacity is not as good as aluminum..

以上就是為大家介紹的有關自動攪拌一體車的詳細介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以專業的態度,為您提供服務http://www.shanqijituan.cn/

The above is a detailed introduction to the automatic mixer, which I hope will be helpful to you If you have any questions, please contact us We will provide you with professional service http://www.shanqijituan.cn/

上一頁：全自動上料攪拌車發動機早期損壞的原因有哪些？下一頁：自動混凝土攪拌車減震器漏油的六大原因

熱門產品 / HOT PRODUCT